CBM CBM1000 Instrukcje Operacyjne Strona 126
- Strona / 230
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
— 108 —
GS P x y
[Function] Specifying the basic calculation pitch
[Code] <1D>H<50>H<x><y>
[Range] 0
x 255
0
y 255
[Outline] This command sets the horizontal basic calculation pitch to
approx. 25.4/x mm (1/x inches), and the vertical basic calculation
pitch to approx. 25.4/y mm (1/y inches).
• If x = 0, the horizontal basic calculation pitch is reverted to the
default value.
• If y = 0, the vertical basic calculation pitch is reverted to the
default value.
[Caution] • The horizontal direction is defined as the direction
perpendicular to the paper feed, and the vertical direction is
defined as the paper feed direction.
• In STANDARD MODE, the following parameters are used
regardless of the character orientation (e.g. inverted or 90°-
right-turned).
(1) Commands using x: ESC SP, ESC $, ESC \, GS L,
GS W
(2) Commands using y: ESC 3, ESC J
• In PAGE MODE, the parameters used depend on the character
orientation, as follows:
(1) If the start point specified by ESC T is the top left or bottom
right (The characters are mapped in the direction
perpendicular to the paper feed):
• Commands using x: ESC SP, ESC $, ESC W, ESC \
• Commands using y: ESC 3, ESC J, ESC W, GS $,GS \
(2) If the start point specified by ESC T is the top right or bottom
left (The characters are mapped in the paper feed direction):
• Commands using x: ESC 3, ESC J, ESC W, GS $,GS \
• Commands using y: ESC SP, ESC $, ESC W, ESC \
• This command does not affect any other values that are
already set.
• If calculations made in combination with another command
generate fractions, the fractions are corrected with the
minimum pitch of the mechanism, and the remainder is
omitted.
[Default] x = 203, y = 360
[See Also] “PAGE MODE” in APPENDIX 1
ESC SP, ESC $, ESC 3, ESC J, ESC W, ESC \, GS $, GS L, GS W,
GS \
- Declaration of Conformity 2
- IMPORTANT SAFETY INSTRUCTIONS 3
- Sicherheitshinweis 5
- For Uses in Canada 5
- Pour L’utilisateurs Canadiens 5
- GENERAL PRECAUTIONS 6
- SAFETY PRECAUTIONS 7
- PRECAUTIONS FOR INSTALLATION 9
- PRECAUTIONS FOR HANDLING 10
- HOT AREA: 11
- DAILY MAINTENANCE 12
- CAUTION: 12
- THE TABLE OF CONTENTS 14
- <<< 17
- >>> 17
- — xvii — 18
- 1. GENERAL OUTLINE 19
- 1.2 Unpacking 20
- 2. BASIC SPECIFICATIONS 21
- CBM1000 - R F 120 S - L 21
- 2.2 Basic Specifications 22
- 2.3.3 Used Paper Form 25
- 3.1 CBM1000S 27
- 3.2 CBM1000A / CBM1000D 28
- 4. OPERATION 29
- Approx. 5 cm 32
- 4.7 Removing Paper Jams 35
- 4.8 Cleaning the Print Head 36
- POWER lamp (Green) 38
- ERROR lamp (Red) 38
- FEED switch 38
- Starting hexadecimal dump 40
- Quitting hexadecimal dump 40
- 5. SETTING DIP SWITCHES 41
- DIP switch 1 42
- Print density (DIP switch 1) 42
- DIP switch 2 43
- * : Depends on destinations 43
- DIP switch 3 44
- DIP switch 4 44
- Baud rate (DIP switch 4) 44
- 6. PARALLEL INTERFACE 45
- Applicable connectors 46
- 6.2.4 Data Reception Control 49
- 6.2.5 Buffering 49
- 7. SERIAL INTERFACE 50
- 7.3.2 Error Detection 53
- 7.3.3 Data Reception Control 53
- 7.3.4 Buffering 53
- RS-232C circuit 54
- Input (RD, DSR, INIT) 54
- Output (DTR, TD, RTS) 54
- 8.1.4 Drive Circuit 56
- 9. MAINTENANCE AND SERVICE 57
- 10. PRINT CONTROL FUNCTIONS 58
- Command relative to NV memory 60
- Label Control 61
- 10.2 Command Details 62
- 10.2.2 Command Details 63
- ← Print and line feed 64
- ← Line feed only 64
- FF (Page Mode) 66
- FF (Standard Mode) 66
- DLE EOT n 68
- DLE ENQ n 71
- DLE DC4 n m t 72
- ESC SP n 74
- ← 0-dot space 75
- ← 1-dot space 75
- ← 12-dots space 75
- ESC ! n 76
- ESC $ n1 n2 78
- Relative Position Specified 79
- Absolute Position Specified 79
- ESC % n 80
- [Example] 82
- m n1 n2 [ d ] k 83
- ← 8-dots single density 84
- ← 8-dots double density 84
- ← 24-dots single density 84
- ← 24-dots double density 84
- ESC – n 85
- ESC 3 n 87
- ESC = n 88
- ESC ? n 89
- ← Each setting has been 90
- ESC D [ n ] k NUL 91
- ESC E n 92
- ESC G n 93
- ESC J n 94
- ESC R n 97
- ESC T n 99
- 90° Rotation Canceled 100
- ←→ 100
- ←→ 100
- 90° Rotation Specified 100
- Print Area 102
- Paper Feed Direction 102
- ESC \ nL nH 103
- ESC a n 104
- ESC c 3 n 105
- ESC c 4 n 106
- ESC c 5 n 107
- ESC d n 108
- ESC p m n1 n2 109
- ESC t n 110
- ESC { n 111
- GS ! n 112
- GS $ nL nH 114
- n1 n2 [ d ] n1×n2×8 115
- ← QUADRUPLE MODE 116
- ← NORMAL MODE 116
- ← DOUBLE WIDTH MODE 116
- ← DOUBLE HEIGHT MODE 116
- GS ( A pL pH n m 117
- GS / m 118
- GS B n 120
- GS H n 121
- [Print Results] 122
- GS I n 123
- GS L nL nH 124
- GS P x y 126
- GS W nL nH 128
- GS \ nL nH 130
- GS ^ n1 n2 n3 131
- GS a n 132
- DIP Switch 2-6 ON: n = 2 134
- APPENDIX 3 134
- GS f n 135
- GS h n 136
- GS k m [d1 ..... dk] NUL 137
- GS k m n [d1 ...... dn] 137
- GS r n 145
- GS v 0 m xL xH yL yH d1...dk 147
- GS w n 149
- [Range] m=0 150
- [Reference] FS g4 151
- FS g4 m a1 a2 a3 a4 nL nH 152
- [Reference] FS g3 153
- F S p n m 154
- [Related Commands] 155
- GS < 160
- GS A m n 160
- GS C0 m n 161
- GS C2 n1 n2 163
- GS I n1L n1H n2L n2H 165
- 11. CHARACTER CODES TABLE 166
- 11.1.10 Windows Codepage 170
- 12. APPENDIX 1. PAGE MODE 172
- Baseline 174
- Double Height Character 174
- —158 ——158 — 176
- 13.1 Overview 178
- 13.1.2 Interfacing Phases 179
- 13.2 Negotiation 180
- 13.2.3 Precautions 181
- 13.2.4.1 Nibble Mode 182
- 13.2.4.2 Byte Mode 183
- 13.2.5 Device ID 184
- 13.2.6 Termination 184
- 15.1 CBM1000S 187
- 15.2 CBM1000A / CBM1000D 188
- 15.3 AC Adapter (31AD) 189
- 16. APPENDIX 5. BLOCK DIAGRAM 190
- SICHERHEITSVORSCHRIFTEN 193
- HEISSER BEREICH: 197
- TÄGLICHE WARTUNGSARBEITEN 198
- ACHTUNG: 198
- 4. BETRIEB 200
- ACHTUNG : 201
- Auswurfhebel 204
- Druckeradeckung 204
- Abreißschiene 204
- Druckkopf 204
- Papierrolle 204
- 4.8 Reinigen des Druckkopfes 208
- Taste FEED 210
- Anzeigeleuchte POWER (Grün) 210
- Anzeigeleuchte ERROR (Rot) 210
- Starten des Hexdump 212
- Beenden des Hexdump 212
- 5.1 Position der DIP-Schalter 213
- 5.2 DIP-Schaltertabelle 214
- DIP-Schalter 3 216
- DIP-Schalter 4 216
- Baud-Rate (DIP-Schalter 4) 216
- 6. PARALLELE SCHNITTSTELLE 217
- Verwendbare Anschlüsse 218
- 6.2.2 Elektrische Kenndaten 220
- 6.2.4 Datenempfangssteuerung 221
- 6.2.5 Datenpufferspeicher 221
- 7. SERIELLE SCHNITTSTELLE 222
- 7.3.2 Fehlererkennung 225
- 7.3.3 Datenempfangssteuerung 225
- 7.3.4 Pufferung 225
- 7.3.5 Elektrische Kenndaten 226
- 8.1.4 Treiberschaltung 228
- 9. WARTUNG UND KUNDENDIENST 229
Powiązane produkty i podręczniki dla Drukuj i skanuj CBM CBM1000
Drukuj i skanuj CBM iDP3240 Instrukcje Operacyjne
(230 strony)
(230 strony)
Drukuj i skanuj CBM CBM1000 Instrukcja Obsługi
(41 strony)
(41 strony)
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.039 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji